J: 0 to 600°C / K: 0 to 1200°C /
PT-100: -99 to 400ºC /PT.1: -99.0 to 400.0°C
PID
Output 1
Output 2
Power Supply
0 To 10V DC
1 Relay (High/Low/Inband/Outband Alarm mode Selectable)
100 to 250V AC, 50 / 60 Hz smps
Model
Display
Size
Panel Cutout
Input
Temperature
Range
Control Action
44 X 44
48 X 48 X 95
UPPER:- 4 Digit 7 seg .39”,red LED Display
LOWER:- 4 Digit 7 seg .28”,green LED Display
UTC-4201A
J, K, PT-100 (selectable)
OPERATING MANUAL
TEMPERATURE CONTROLLER WITH ANALOG OUTPUT
www.multispanindia.comPage - 1
Technical Specification
Note :
1) Press + key for 3 sec to go to Factory Setting mode.
2) Press key to go to next parameter.
3) Press or to enter value or to select option.
4) Every time the instrument is turned ON, following pattern will be displayed
5) When manual mode selected, using & key, we can enter output value
0 to 10V DC.
UTC-4201A
All digit segment will be turned ON for 3 sec
Previous or default sensor input will be display for 2 sec
Process Value
Set Value
R1
R2
To Next Page
Need help?
General
