multivac 310-MS - Maintenance

 Please suck in pure water to clean the tubing after every use and keep pumping air for
at least 1 min to drain out the residual liquid.
 Please clean the surface of manifold with pure water or 75% ethanol.
 MultiVac manifold, filter holder and vacuum bottle are autoclavable (121°C, 1 bar, 20
min). Please keep all control valves/ knobs and vent valve at “OPEN” position to make
a complete sterilization when autoclaved.
 Silicone tube and O-ring are consumables. Please replace with new silicone tube and
O-ring in case of air leakage problem.
O-ring of Control Valve
O-ring of Plug
O-ring of Outlet
O-ring of Adaptor
Maintenance