Page12of18
ITPP047 Easy Setup Guide
Version 1.00
4.2.4 Wi-Fi Printer Installation
Connect your computer to the wireless router. Please see the picture below.
Figure 1- 8
Connection Diagram
Open the downloaded driver and install it, then follow the demo video to configure Wi-Fi.
Demo video: https://munbyn.biz/Mac-WIFI
4.3 Set Up the ITPP047 for First Use on Linux
You can get the driver from the included USB flash drive at this path: Driver CD → Driver → Linux
Driver. You can also click the link below to download the driver.
Driver download link: http://u.pc.cd/jxP7
1) Connect the printer to the power outlet via the power cord.
2) Connect the printer to your Windows computer via USB.
3) Place the thermal paper into the printer and power it on.
To Next Page
Loading...
