Munchkin Brica Baby In-Sight User Manual

Questions?
1.866.869.8257
brica.com
©2012 BRICA, Inc. 500 West 5th Street,
Suite 220, Charlotte, NC 28202
Retain this address for future reference.
Baby In-Sight
®
63010
Back Seat Head Restraint
• Raise head restraint.
• Insert clamp underneath head restraint.
• Wrap adjustable stand over top of head restraint.
• Bend clamp upward to conform to head restraint.
• Attach strap’s clip to D-Ring.
• Lower head restraint down to secure in place.
• Tighten strap and rotate mirror to desired angle so your child is visible to driver
in vehicle’s rear-view mirror.
IMPORTANT SAFETY PRECAUTIONS:
Keep mirror out of baby’s reach and direct sunlight. Always carefully follow car seat
manufacturer’s directions for correct installation and position of a child safety seat.
If the tether anchor is being used to secure a child safety seat, do not use this
attachment method.
D-Ring Clip
Strap
Adjustable
Stand
Clamp
Tether Anchor
Adjustable Stand
Fastener
Clip
Tether
Anchor
Clamp
IMPORTANT: Do not attach this product to your vehicle’s tether anchor if your child
safety seat is installed in your vehicle using this anchor.
• Position mirror on back seat in front of tether anchor.
• Insert clamp between seat and rear deck of your vehicle.
• Bend clamp to conform to seat shape.
• Attach clip to tether anchor and tighten strap.
• Unfasten adjustable stand’s fastener, and tilt mirror to desired angle so your child
is visible to driver in the vehicle’s rear-view mirror.
NOTE:
The tether anchor attachment method is designed for sedan vehicles. If you own a
mini-van, station wagon or sport utility vehicle (SUV) and would like to use the
tether anchor attachment, you may need a tether extender. Please visit BRICA® at
brica.com or call 1.866.869.8257
Center Back Seat with Deck
Adjustable
Stand
Fastener
Back Seat
Rear Deck
Clamp
• Position mirror on center front side of back seat.
• Bend the clamp to conform to the top of back seat.
• Insert clamp between seat back and rear deck.
• Adjust as needed so clamp is secure.
•Unfasten adjustable stand’s fastener, and tilt mirror to
desired angle so your child is visible to driver in vehicle’s
rear-view mirror.

Munchkin Brica Baby In-Sight Specifications

General

Brand	Munchkin
Model	Brica Baby In-Sight
Category	Baby Accessories
Language	English

Summary

Back Seat Head Restraint Installation

Head Restraint Mounting

Steps to install the mirror by attaching it to the head restraint.

Head Restraint Safety Precautions

Safety advice for mirror placement and car seat installation.

Tether Anchor Attachment

Tether Anchor Installation

Steps to attach the mirror using the vehicle's tether anchor.

Tether Anchor Vehicle Note

Note for sedan vehicles and recommendations for other vehicle types.

Center Back Seat Mounting

Back Seat with Deck Installation

Steps to mount the mirror on the back seat with a deck.

Bench Seat Installation

Bench Seat Mounting

Steps to attach the mirror to a bench seat.

Bench Seat Tether Anchor Note

Advice on using the tether anchor for increased mirror stability.

General Product Safety and Care

General Safety Precautions

General safety advice for mirror use and placement.

Cleaning Instructions

Instructions for wiping the mirror and its fabric.

Critical Warnings

Critical warnings about strangulation and unattended children.

Security Caution

Caution regarding mirror security and frequent checks.