17
List of the minimum parts to be checked
1st inspection 2nd inspection 3rd inspection
Inspection criteria
OK n. OK OK n. OK OK n. OK
Rungs / steps / platform
Deformation
Damage (e.g. cracks) / corrosion
Connections and completeness
Wear (platform covering, tread surface)
Sharp edges / splinters / burrs
Stile/legs
Deformation
Damage (e.g. cracks) / corrosion
Sharp edges / splinters / burrs
Wear
Protective coatings
Fittings / joints / locks / connecting elements / rung hooks / rivets /
screws / bolts
Completeness / fixing
Damage (e.g. cracks) / corrosion
Wear
Firm fitting
Functionality
Lubrication (mechanical Parts)
Ladder feet / rollers / end caps
Firm fitting of the fixing / completeness
Wear / damage
Functionality
Corrosion
Opening restraint device / lock
Fixing / completeness
Damage
Corrosion
Functionality in horizontal position
To Next Page
Loading...