4
The document is intended for the user of the product described and may only be passed
on to the purchaser if the ladder is resold.
Subject to technical modifications and errors. No claims to specific properties of the pro-
duct can be derived from the contents of these operating instructions.
Intended use
MUNK GmbH ladders comply with the DIN EN 131 series of standards.
Ladders that have been tested and certified for safety by an independent testing institute
can be recognised by the seal of approval.
Only use the ladder under the conditions described in these operating instructions. Any
other use is considered improper.
Ladders for professional use
The use of ladders as high-level workplaces is only permitted in cases where, because of
the low level of risk and because the duration of use is short, the use of other safe work
equipment is not appropriate and the risk assessment has established that the work can
be carried out safely.
NOTICE
DGUV Guideline
The guideline for the use of ladders and steps (DGUV-I 208-016) lists the regu-
lations of the German Work Safety Act, the Ordinance on Safety and Health (Be-
trSichV), the regulations of the employer‘s liability insurance association and the
relevant standards that must be taken into account when providing and using lad-
ders and steps.
As an implementation of the EU Work Equipment Directive, the BetrSichV stipulates a
periodic inspection of work equipment, e.g. ladders, by a person qualified to carry out the
inspection.
Technical data
All ladders listed correspond to the „professional use“ ladder class as per DINEN 131-
2:2017.
The max. load capacity of all the ladders listed in these instruction is 150 kg.
Platform stairs, single-sides access, spring-loaded castors, grooved aluminium
Article number 50102 50103 50104 50105 50106 50107 50108
Work heigth [m] 2,48 2,70 3,00 3,20 3,50 3,70 3,90
Platform heigth [m] 0,48 0,72 0,96 1,20 1,44 1,68 1,92
Step quantity, incl. platform 2 3 4 5 6 7 8
Approx. weight [kg] 2 7, 0 30,0 32,0 35,0 38,0 43,0 4 7, 0
Platform stairs, single-sides access, spring-loaded castors, steel grating
Article number 51102 51103 51104 51105 51106 51107 51108
Work heigth [m] 2,48 2,70 3,00 3,20 3,50 3,70 3,90
Platform heigth [m] 0,48 0,72 0,96 1,20 1,44 1,68 1,92
Step quantity, incl. platform 2 3 4 5 6 7 8
To Next Page
Loading...