16
Check/inspection sheet for all ladder types
Check sheet for the checking of steps and ladders in accordance with
BetrSichV, the directions for use for steps and ladders, DGUV information sheet 208-016
(formerly BGI 694).
The time intervals for the inspections are based in particular on frequency of use, load
values during use, as well as the frequency and severity of the detected deficiencies of
previous inspections.
The results of this inspection are to be recorded.
Inventory no.
Location
Type of ladder
Leaning ladder Standing ladder
Rope-operated
ladder
Combination ladder
Platform ladder Extending ladder
Sectional ladder Step stool
Other
Ladder material Aluminium Plastic
Steel Stainless steel
Wood Plastic / aluminium
Ladder data Ladder lenght/height
Number of rungs/steps
max. load
Fittings (e.g. EX-design)
Certification mark:
(GS-mark / type tested)
yes no
Data after a repair Ladder length/height
Number of rungs/steps
Manufacture /
supplier
Order no.
Purchase date
Inspection performed by
Responsible persons infom-
red
Comment:
To Next Page
Loading...