D
David HughesSep 10, 2025
Why does my Muratec MFX-3510 Copier say 'Toner is empty'?
- TTimothy PierceSep 12, 2025
The 'Toner is empty' message indicates that the toner cartridge needs to be replaced with a new one.
Why does my Muratec MFX-3510 Copier say 'Toner is empty'?
The 'Toner is empty' message indicates that the toner cartridge needs to be replaced with a new one.
Why Muratec Copier cannot print documents?
If your Muratec Copier isn't printing documents, first ensure the machine is online by pressing ? “On Line” ? [Enter] ? “ON” ? [Enter]. Check that paper is loaded correctly and that the toner and drum cartridge haven't run out; replace them if necessary. Make sure the printer driver is installed and the correct printer is selected in your application's print menu. Verify that the printing port is correct in the printer driver properties, and that the computer's system memory meets the requirements. If printing from Mac OS X 10.2 via USB, note that certain settings are unavailable; consider printing via network or upgrading your Mac version.
What to do if Muratec MFX-3510 cannot print correctly?
If your Muratec Copier isn't printing correctly, the paper size and orientation settings in the application software may be overriding the printer driver settings. Ensure the correct settings are specified in the application software. Also, if you are printing multiple sets, check whether the machine has sufficient memory for printing by trying to print one set first. You might also try setting a lower image resolution or simplifying the image to reduce data size.
Type | Multifunction Copier |
---|---|
Functions | Print, Copy, Scan, Fax |
Print Speed | 35 ppm |
Print Resolution | 1200 x 1200 dpi |
Scan Resolution | 600 x 600 dpi |
Copy Speed | 35 cpm |
Monthly Duty Cycle | 50, 000 pages |
Dimensions | 22.5 x 18.5 x 18.9 inches |
Weight | 68 lbs |
Duplex Printing | Yes |
First Copy Time | 6.5 seconds |
Connectivity | USB, Ethernet |
Copy Capacity | 99 copies |
Paper Size | Letter, Legal, A4 |