To Next Page
A
Alyssa ClarkJul 26, 2025
How to fix Muratec MFX-3530 Copier cannot connect to the network?
- JJames JonesJul 26, 2025
To resolve network connectivity issues with your Muratec Copier, first, ensure the power cord and plug are securely connected. Next, verify that the LAN cable is properly connected to both the copier and any network devices such as LAN hubs or routers. If there are still issues, inspect the LAN cable and LAN card for any damage, and replace them if necessary. Also, make sure that all network devices are powered on. Try connecting the copier to a different port to see if it works correctly; if not, replace the device. Finally, ensure the correct network settings are specified on the copier, referring to the device's instruction manual, especially after replacing any devices.
General
