1
Basic scan settings 1-17
Basic scan functions
Basic scan settings
You can set the resolution and mono/color for scanning.
NOTE
You can change the default settings, as necessary. For details, see “Specifying default
scanner settings” (page 7-29).
Resolution
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Scan Ready” screen
is displayed.
2
Press [Resolution].
If [Resolution] is not displayed, press [Advanced] and then [Resolution].
3
Select the desired resolution, and press [Enter].
NOTE
•If you set a high resolution, the document will be scanned clearly, but the size of the
created file will be large.
•You cannot select 600 dpi when both color scan (page 1-18) and duplex scan (page
2-14) are set.
To Next Page
Loading...
Need help?
General
