4-16 Transmission related settings
Sending the sender name (TTI)
You can select from three types of sender names registered in advance. You can also
transmit without adding a sender name.
For details on registering the sender names, see “Registering your name or company
name (TTI)” (page 7-26).
1
Press [Fax] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Fax Ready” screen is
displayed.
2
Press [Advanced].
3
Press [TTI].
4
Select [ON].
Select [OFF] to deselect the setting.
5
Select the sender name, and press [Enter].
6
Press [Close].
7
Specify the destinations, then press <Start>.
For details on specifying the destinations, see “Specifying destinations” (page 5-2).
To Next Page
Loading...
Need help?
General
