6-2 Checking the transmission report
Checking the transmission report
You can print or e-mail the transmission results of faxes.
NOTE
You can also set to always print a transmission report. For details, see “Specifying
default fax settings “ (page 7-35).
Issuing the transmission report
1
Load the document.
2
Press [Fax] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Fax Ready” screen is
displayed.
3
Press [Advanced].
4
Press [Tx Report].
5
Press [Tx Report Setting].
6
Select the method for checking the transmission result, and press [Enter].
If you selected “OFF” or “Print”, press [Enter] and proceed to step 8.
To Next Page
Loading...
