2-24 Advanced scan functions
Color adjustment (Color Adjust)
When you scan in color, you can adjust the image to suit your requirements.
NOTE
•The color can only be adjusted when “Color” is set. For details, see “Color” (page
1-18).
•Images shown in this manual are sample data, which may be different from the
actual images.
Adjusting the contrast
You can set the image contrast (the difference between light and dark) to seven different
levels, from -3 (low) to +3 (high).
– : The difference between brightness and darkness reduces and the whole image
becomes dark.
+ :The light parts become lighter, and the dark parts darker.
-3 -2 -1 0 +1 +2 +3
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Scan Ready” screen
is displayed.
2
Press [Advanced].
3
Press [Color Adjust].
To Next Page
Loading...
