1
2
Advanced scan functions 2-23
Advanced scan functions
6
If you want to edit subject, press [Subject].
Otherwise, go to step 8.
7
Enter the subject, and press [Enter].
•Up to 80 characters can be entered for the subject.
•For details on entering the characters, see chapter 1, “Entering characters” in the
Administrator’s Guide.
8
If you want to edit mail text, press [Mail Text].
Otherwise, go to step 10.
9
Enter the mail text, and press [Enter].
•Up to 1,024 characters can be entered for the message.
•For details on entering the characters, see chapter 1, “Entering characters” in the
Administrator’s Guide.
•Press to enter a line break. A line break takes up two characters.
•Press [ViewText] to confirm the mail text that has been entered. After confirming, press [Edit]
to return to the entry screen.
10
Press [Enter].
11
Press [Close].
12
Specify the destinations, and press <Start>.
For details on the procedure, see “Basic scanning” (page 1-2).
To Next Page
Loading...
Need help?
General
