1
2
Advanced scan functions 2-9
Advanced scan functions
Scan size
You can transmit or save an image scanned using a scan size set in advance. This is
useful when you want to scan a part of the document or to specify the document size.
NOTE
•When you scan using the document glass, only an area from the reference setting
position equal to the set scan size is scanned.
•When you scan using the automatic document feeder, only an area from the
center with a width equal to the set scan size is scanned. The whole length of the
document is scanned.
Document glass Automatic document feeder
Reference setting position
A: A4 / A5 / F4
A
Reference
setting
position
A5 A4 F4
Reference setting position
A: Legal / Letter / Half-letter
Half-letter Letter Legal
A
Reference
setting
position
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Scan Ready” screen
is displayed.
2
Press [Advanced].
3
Press [Scan Size].
If you loaded the document in the automatic document feeder, “Auto” is selected.
To Next Page
Loading...
