1
2
3
4
Advanced fax functions
Security fax functions 4-23
Destination confirmation function
You can check the entered destinations on the display at transmission. For details, see
“Checking with destination confirmation function” (page 5-15).
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [Management].
If an administrator password is set, enter the password and press [Enter].
3
Press [Security Communication].
4
Press [Confirm Destination].
5
Select desired setting, and press [Enter].
OFF :
ON :
Broadcast Only :
Do not display the confirmation screen.
Display the confirmation screen every time at transmission.
Display the confirmation screen when there are two or more
destinations.
6
Press [Close].
To Next Page
Loading...
Need help?
General
