2-22 Advanced scan functions
e-mail subject
When transmitting a scanned image via e-mail, you can edit the mail text and subject
of the e-mail you are sending. You can also enter the mail text of the e-mail using a
template registered in advance.
NOTE
•For details on registering the e-mail templates, see “Registering / Editing templates”
(page 7-38).
•You can edit the message for the currently scanning document, but not save it on
the machine to use it later.
•This function can be used with “Scan to e-mail”.
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Scan Ready” screen
is displayed.
2
Press [Advanced].
3
Press [e-mail Subject].
4
Press [Template].
5
Select the template to use, and press [Enter].
•If you selected “A1:Auto Subject + Text”, you cannot edit the subject and mail text.
Proceed to step 10.
•If you selected “A2:Auto Subject”, you can only edit the mail text. Proceed to step 8.
To Next Page
Loading...
Need help?
General
