Muratec MFX-3530 - Registering; Editing Domain Names

1
2
3
4
5
6
7
Registering other settings 7-41
Machine settings
Registering / Editing domain names
The domain name buttons displayed in the “Alphanumeric Display” screen on the
character entry screen can use registered domain names. You can register up to 10 types
of domain names in advance.

Registering / Editing
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [Register].
3
Press [Domain Name].
4
Select a new button.
To change a domain name that is already registered, select the domain name you want to
change.
5
Enter the domain name, and press [Enter].
•Up to 20 characters can be entered.
•For details on entering characters, see chapter 1, “Entering characters” in the
Administrator’’s Guide.
•To continue to register or edit domain names, repeat the procedure in steps 4 to 5.

Deleting
Delete all the characters in step 4 of “Registering / Editing”, and press [Enter].