1-8 Basic scanning
Scanning to FTP servers
You can save a scanned document to a specific folder on an FTP (File Transfer Protocol)
server.
FTP Server
LAN
Scan
PDF, JPEG
TIFF, PDF
NOTE
•To scan to FTP server, you should connect the machine to a network and setup the
“TCP/IP Settings” in advance.
See chapter 2, “TCP/IP settings” in “Specifying the network settings” in the
Administrator’s Guide.
•The FTP shortcuts should be registered to your machine in advance. For details
on registering the folder shortcuts, see “Registering / Editing FTP server shortcuts”
(page 7-17).
Scanning to a FTP server using FTP shortcut
1
Load the document.
2
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Scan Ready” screen
is displayed.
3
Set the resolution and document type, as necessary.
For details, see “Resolution” (page 1-17) and “Color” (page 1-18).
To Next Page
Loading...
Need help?
General
