2-2 Introduction to advanced functions
Introduction to advanced functions
This product includes the following scan functions.
Resolution
You can set the resolution for scanning (page 1-17).
Color
You can set whether to scan the document in color or monochrome (page 1-18).
Document type (Doc.Type)
You can set the document type to scan with according to the document (page 2-4).
Contrast
You can set the contrast to scan with according to the document (page 2-5).
File name
You can edit the file name for the scanned image data. You can also enter the file name
using a file name registered in advance (page 2-6).
Scan size
You can transmit or save an image scanned using a scan size set in advance. This is
useful when you want to scan a part of the document or to specify the document size (page
2-9).
Stamp (Option)
You can stamp on a document that has been scanned (or transmitted) using the automatic
document feeder and check it has been scanned (page 2-11).
Next document setting (Next Doc.)
You can transmit or save separate documents scanned in a row as a single set of data.
Since you can scan using both the document glass and the automatic document feeder,
this is useful for transmitting / saving a combination of documents such as an invoice and
a map together (page 2-12).
Duplex scan
You can transmit or scan both sides of a document (page 2-14).
Broadcast
You can transmit to multiple destinations with a single operation. You do not need to
scan the document repeatedly for each individual destination (page 2-16).
Batch scan
When the “Batch Scan” function is on, it means that all scanned pages will be saved as
one file. If you turn this function off, each scanned page will be saved as an individual file
(page 2-18).
File format
You can select the file format (TIFF, PDF, etc) for sending (page 2-19).
To Next Page
Loading...
Need help?
General
