3-4 Basic faxing
Manual transmission
Use this method when the other fax machine uses manual reception.
NOTE
Manual transmission cannot be performed from the document glass.
1
Load the document in the automatic document feeder.
2
Press [Fax] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until “Fax Ready” screen is
displayed.
3
Press [Monitor].
If [Monitor] is not displayed, press [Advanced] and then [Monitor].
4
Specify the destination.
For details on specifying the destinations, see “Specifying destinations” (page 5-2).
5
When you hear the beep from the other fax machine, press <Start>.
To Next Page
Loading...
