Muratec MFX-3530 - Registering; Editing File Names

7-40 Registering other settings
Registering / Editing file names
You can register up to 20 file names to use for scanned image data in advance.

Registering / Editing
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu
screen is displayed.
2
Press [Register].
3
Press [File Name].
4
Select a new button.
To change a file name that is already registered, select the file name you want to change.
5
Enter the file name, and press [Enter].
•Up to 80 characters can be entered.
•For details on entering characters, see chapter 1, “Entering characters” in the
Administrator’s Guide.
•To continue to register or edit file names, repeat the procedure from step 4.

Deleting
Delete all the characters in step 4 of “Registering / Editing”, and press [Enter].