Section 30 00-02-0977
2018-02-23 - 2 -
Operations Manual Location
After installation, please review the TEC-10 Operations Manual
prior to placing the controller into service. In order to access the
TEC-10 Operation Manual, please visit:
support.enovationcontrols.com
Then search for TEC-10. Download the latest manual by clicking
the link under the Manuals section of the page.
Hardware Installation
Inspecting Package Contents
Before attempting to install the product, it is recommended that
you ensure all parts are accounted for and inspect each item for
damage (which sometimes occurs during shipping). The items
included in the box are:
TEC-10 Controller kit – P/N 40-70-0495 includes:
• TEC-10 Control Panel
• Mounting Kit:
o 4 Shockmount Isolators
o 4 ¼ x 20 Hex Keps Nuts
• TEC-10 Installation Manual – P/N 00-02-0977
Tools Needed
Use a 9/32 or 7.5mm drill bit to make the approximately sized
0.28125” or 7.5mm mounting holes.
Use a 7/16” or 11mm torque wrench for shockmount nut
installation.
To Next Page
Loading...
Need help?
General
