Need help?Do you have a question about the Murray 1695539 and is the answer not in the manual?
General| Brand | Murray |
|---|---|
| Model | 1695539 |
| Category | Snow Blower |
| Language | English |
Information on understanding the unit for best performance and contacting dealers for support.
Details on levers, cranks, deflectors, chutes, skids, drift cutters, and shear bolts.
Explanation of engine-related features like safety key, primer, start buttons, and choke.
Identification of hazard symbols for safety alerts and warnings.
Explanation of symbols for controls, directions, and engine status.
Dangers related to rotating auger, thrown objects, and unclogging.
Risks from rotating impeller and potential hand injuries.
Warning about deadly carbon monoxide gas from engine exhaust.
Warning about gasoline vapors being flammable and explosive.
Guidelines for adding, starting, operating, transporting, and storing fuel.
Importance of operator controls, unit familiarization, and training.
Steps for preparing the area, unit, and operator for safe operation.
Procedures for safe operation, avoiding hazards, and proper use.
Additional safety rules for operation, bystanders, and child supervision.
Procedure for safely removing snow or debris from the discharge chute.
General recommendations and tasks for after-use maintenance.
Details on emissions and ignition system compliance.
Steps for removing from carton and assembling handles, knobs, and chute deflector.
Procedures for checking cables and setting skid height.
Assembling optional cutters, preparing the engine, and final operating checks.
Familiarizing with controls and adjusting snow discharge direction and distance.
How to stop the unit, move forward/backward, and use wheel lockout.
Procedure for engaging the auger drive lever to throw snow.
Steps for starting cold, warm, or frozen engines, including pre-start checks.
Steps to prevent freeze-up of controls after snow removal.
Safe procedure for clearing snow or debris from the auger housing.
Advice for optimizing snow removal speed and overlap.
General recommendations and tasks for after-use maintenance checks.
Intervals for lubricating fittings, gears, chains, and parts not to lubricate.
How to adjust skids and scraper bar for proper ground clearance.
Procedures for checking and adjusting auger and traction drive cables.
Steps to adjust the tension of the auger drive belt.
Note on traction drive belt slipping requiring replacement.
Detailed steps for removing both auger and traction drive belts.
How to adjust and replace the friction wheel for propulsion issues.
Procedure for replacing shear bolts and preparing the unit for storage.
Information on obtaining replacement parts and required details.
Causes and corrections for starting problems and erratic engine performance.
Causes and corrections for engine stalling, vibration, and unit not moving.
Causes and corrections for clogged chutes and lodged objects in auger.
Information on warranty periods for consumer and commercial use.
Details on what the warranty covers, exclusions, and the need for proof of purchase.
To Next Page
