EasyManua.ls Logo

Murray M26-S - Page 11

Murray M26-S
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Not for
Reproduction
11
Safety Instructions
Starting Safety
Start the engine with feet well away from the cutting head.
Ensure that the area of starting and operation is clear of sticks, stones, glass, nails, wire,
string and debris, which could be thrown by the cutting head.
Cutting Safety
Use only in good visibility and favourable weather conditions.
Keep children, animals and bystanders outside the 15 metre hazard zone. Stop the
engine immediately if approached.
Keep the engine to the right of your body, holding the unit with both hands.
Keep a firm footing and balance. Do not over reach.
Keep the cutting head below waist level and do not raise the engine above your shoulder.
The cutting head can come dangerously close to your body.
Keep your body away from the cutting head and muffler when the unit is running.
Do not strike objects that may cause harm or damage to the unit.
Maintenance Safety
Stop the engine and disconnect the spark plug before clearing blockages, checking or
working on the unit.
Stop the engine, disconnect the spark plug and inspect the unit if it begins to vibrate
abnormally or if it strikes a foreign object.
Use only genuine MURRAY trimmer line. Never use wire, rope, string, etc.
Use only genuine MURRAY replacement parts.
Transporting and Storage
Hand carry the unit with the engine stopped, the muffler away from your body.
Allow the engine to cool, empty the fuel tank and secure the unit before storing or
transporting in a vehicle.
Empty the fuel tank after each use and before storing the unit.
Store the unit and fuel well away from sparks or open flames from water heaters, electric
motors, switches or furnaces, etc.
Store the unit out of reach of children and unauthorised persons.
SAFETY
&
HANDLING
15 METRES

Related product manuals