What to do if Murray Trimmer engine stops during operation?
If the Murray Trimmer engine stops during operation, ensure your hands are clear of the switch to prevent accidental bumps. Clean the spark plug to address potential shorting. Also, refuel if the fuel tank is empty.
Why does my Murray Trimmer engine make a knocking noise?
If the Murray Trimmer engine makes a knocking noise, replace the fuel mix with the correct 25:1 ratio fuel mix. Ensure the machine isn't being overworked by operating it properly and avoiding overloads. Clean any dirt and debris from the fan cover and cylinder fins. If you used incorrect fuel, replace it with the correct fuel. Clean cylinder fins if they are overheating.
What to do if Murray M26-T has irregular vibration?
If your Murray Trimmer has irregular vibration or the trimmer head spins while the engine is idling, tighten the trimmer head firmly. If the gear head is loose, tighten the bolt securely.
Summarizes general safety rules for the trimmer.
Provides initial steps for safe operation and fuel handling.
Explains recommended fuels and the correct fuel/oil mixture ratio.
Details the step-by-step procedure for starting the trimmer in cold conditions.
Lists and identifies the components and accessories for the M26-S model.
Illustrates and labels the specific parts of the M26-S trimmer model.
Lists and identifies the components and accessories for the M26-T model.
Illustrates and labels the specific parts of the M26-T trimmer model.
Outlines essential safety guidelines for operating the trimmer and handling fuel.
Highlights potential dangers and necessary precautions to avoid injury.
Specifies the necessary personal protective equipment for safe operation.
Details the process of attaching the trimmer head to the shaft.
Step-by-step guide on how to load new trimmer line into the cutting head.
Instructions for connecting the two parts of the split shaft.
Guide on how to attach the classic handle to the trimmer shaft.
Instructions for installing the protective guard for the cutting head.
Details how to attach and adjust the shoulder strap for ergonomic use.
Important checks to perform on the trimmer before starting the engine.
Step-by-step guide for starting the trimmer in cold ambient temperatures.
Step-by-step guide for starting the trimmer in hot ambient temperatures.
Procedures for safely switching off the engine, including emergency stops.
General techniques and advice for cutting grass and weeds.
Specific techniques for trimming around trees and scalping vegetation.
Introduces routine maintenance tasks for the trimmer.
Instructions for cleaning and maintaining the air filter.
Instructions for checking, cleaning, and adjusting the spark plug.
Guidelines for proper storage of the trimmer to prevent damage.
Steps for restarting the trimmer after a period of storage.
Instructions for safely transporting the trimmer, including disassembly.
Comprehensive table detailing maintenance tasks and their schedules.
Guide to diagnose and resolve issues when the engine fails to start.
Troubleshooting steps for reduced engine power and blockages.
Solutions for issues like knocking noise, poor acceleration, and stalling.
Addresses problems with engine shut-off, overheating, and irregular vibration.
Detailed technical specifications for both M26-S and M26-T models.
Information regarding the warranty coverage and conditions for the trimmer.
To Next Page
General
