EasyManua.ls Logo

Murray M26-T - Safety and Handling; Safety Instructions

Murray M26-T
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Not for
Reproduction
10
Safety Instructions
Do not operate the MURRAY Trimmer before reading all Safety &
Handling sections.
Operator Safety
Wear the necessary safety equipment, as listed on page (12), in Personal Safety
Equipment.
Always wear heavy, long pants. Do not wear loose clothing, jewellery, short pants,
sandals or go barefoot. Secure hair so it is above shoulder length.
Do not operate the unit if you are tired, ill or under the influence of alcohol, drugs or
medication.
Unit Safety
Inspect the entire unit and cutting head before each use.
Ensure that the guard is properly attached.
Do not use the unit if it is running erratically. Have it serviced promptly.
Keep handles free of oil and fuel.
Learn how to stop the engine quickly in an emergency.
Stop the engine when the unit is unattended, even for a moment.
Never allow children or unauthorised persons to operate the unit.
Do not leave the unit on dry cuttings when it is Hot, as a risk of fire is present.
Do not cover muffler or restrict airflow to muffler.
Fuel Safety
Use a container approved for fuel and a funnel to avoid spillage.
Mix and pour fuel outdoors where there are no sparks or flames.
Frequently check for fuel leaks and clean carbon from the muffler at exhaust outlet.
Do not smoke or allow smoking near fuel, or near the unit, or while using the unit.
Add fuel before starting the unit.
Never remove the fuel tank cap while the engine is running or hot, allow to cool before
refuelling.
Never allow the unit to run out of fuel before refuelling.
Move at least three metres away from the fuelling site before starting the engine.
Wipe all traces of fuel on the unit before starting the engine.
Change your clothes before stating the unit if fuel has been spilt on them.
SAFETY
&
HANDLING

Related product manuals