Murray Pressure Washer User Manual

BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON, WISCONSIN, U.S.A.
This pressure washer is rated in accordance to the Pressure
Washer Manufacturer’s Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
Manual No. 208882GS Revision A (01/14/2009)

Murray Pressure Washer Specifications

General

Brand	Murray
Model	Pressure Washer
Category	Pressure Washer
Language	English

Summary

Operator Safety

Important Safety Information

Outlines critical safety hazards, signal words (DANGER, WARNING, CAUTION), and hazard symbols for safe operation.

Assembly

Add Engine Oil

Add Fuel

Connect Hose and Water Supply to Pump

Features and Controls

Operation

How to Start Your Pressure Washer

Step-by-step instructions for starting the pressure washer for the first time or after a period of inactivity.

Starting Engine Procedures

Starter Cord Kickback Warning

How to Stop Your Pressure Washer

How to Use Spray Tips

Applying Detergent

Maintenance

Maintenance Schedule

Engine Maintenance

Checking Oil Level

Steps for checking the engine oil level before each use and ensuring it's within the proper range.

Adding Engine Oil

Instructions on how to add the correct type and amount of engine oil to the crankcase.

Changing Engine Oil

Service Air Cleaner

After Each Use

Post-Operation Procedures

Winter Storage

Protecting Unit from Freezing

Instructions to protect the pump and unit from damage caused by freezing temperatures.

Long Term Storage

Troubleshooting

Pump Problems

Lists common pump issues like low pressure, chattering, and their corresponding causes and corrections.

Engine Performance Issues

Covers engine problems like not starting, running rough, bogging, or losing power.

Warranties

Product Specifications

Product Specifications Details