1 Introduction
Thank you for purchasing the mp-PM A3, a flexible plotter that helps
you label marking elements quickly and easily.
Product description
Rugged construction in stylish aluminium
Labelling area 422 mm x 305 mm for ten aluminium base plates GPx,
one or two base plates GPU A4 or one base plate GPU A3
Easy to change fixtures to suit a variety of marking elements
Optimum plotter pen seal through which pens can be stored in the
plotter's pen station during operation
Universal power supply of 100-240 V AC / 50-60 Hz
Neat labelling right from the very first marking element
PC interface: USB port
Control language: HPGL
Engraving option mp-EM Opt. optionally adaptable
Important
To operate the mp-PM A3
ACS Gold Studio Software 2.3.0.80 SP1 or higher is required.
Before putting the device into service
read the safety instructions in chapter 14.
To Next Page
Loading...
