Introduction and Safety
1.0 Support
1.1 Safety & Warnings
For Muse support, please go to
https://techsupport.signwarehouse.com/muse-vinyl-cutter-support-resources/
Please read the following safety guidelines regarding use of your Muse cutter:
Symbols inside triangles represent important notes that warrant your full attention. There are
dierent symbols denoting specic warnings. The symbol at left, for example, warns of a
possible danger of electric shock.
The cross-bar indicates activities that are prohibited because of risk of injury or possible
damage to your equipment. This particular symbol at left warns against the use of tools to
remove parts of the equipment.
Don't use with an electrical power source which doesn't meet the required voltage rating.
Using with substandard sources of electricity may result in re or electric shock.
Don't use your Muse if it begins to emit an odor or smoke.
Don't un-plug your Muse while powered on. Doing so may damage the equipment.
Make sure your Muse is grounded. Using your Muse without it being grounded may result in risk
of equipment damage or electric shock.
1
Thank you for choosing a Muse vinyl cutter.
To Next Page
Loading...
