Don't disassemble your Muse or attempt repairs unless directed by
SignWarehouse technical support.
Don't drop any liquids or metal objects into your Muse. Liquids or impact from hard
or heavy objects may damage the equipment.
Touching your Muse’s blade with your nger may result in injury.
Don't damage or replace the power cable supplied with the vinyl cutter. Don't
excessively bend, pull, or fold the power cable or place weight on it. Crimping
the power cable may result in risk of failure or electric shock.
If you're not going to use your Muse for a long time, unplug the power
cable from the outlet.
Placing your hands on the cutting platen during operation may result in injury.
Place your cutter on a stable surface. Operating the vinyl cutter on an
unstable surface may result in a fall that can damage the equipment or
internal components.
To unplug the power cable from a receptacle, always grasp the plug
instead of the cable. Pulling the cable may damage it and increase
the risk of re or electric shock.
Don't operate during an electrical storm where lightning is present. For protection
against power surges, a surge protector is recommended.
Don't physically move the cutting head while your Muse is powered on. Manually
moving the cutting head during operation may damage the main board.
To Next Page
Loading...
