Need help?Do you have a question about the Must 1012C and is the answer not in the manual?
Introduces the user manual for the solar power inverter, covering its basic functionality.
Explains the meaning of various indicators and buzzer sounds for diagnosing inverter issues.
Details the information displayed on the LCD screen in different operating modes (Charge, Utility, Battery).
Lists technical specifications for the inverter when operating in line mode.
Provides electrical specifications for the built-in solar charger function.
Covers safety, EMC, operating temperature, humidity, and noise levels for the unit.
Offers recommendations for selecting appropriate AC input wiring for safety and performance.
Details technical parameters for the inverter's operation in inverter mode.
Lists technical specifications for the inverter when operating in charge mode.
Explains the priority settings between AC input and battery power for charging and load supply.
Describes the fan's speed control logic based on internal temperature and load conditions.
Details battery type selection and corresponding voltage settings for AC priority mode.
Details battery type selection and corresponding voltage settings for battery priority mode.
Identifies and explains the functions of buttons and indicators on the front panel.
Outlines the protection mechanisms of the inverter, such as over-temperature and back-feed.
General| Model | Must 1012C |
|---|---|
| Category | Inverter |
| Input Voltage | 12V DC |
| Continuous Power | 1000W |
| Peak Power | 2000W |
| Frequency | 50Hz/60Hz |
| Efficiency | 90% |
| Waveform | Modified Sine Wave |
| Cooling | Fan |
| Protection | Overload, Over Temperature, Short Circuit |
To Next Page
