Attention
1
：Set different models, the highest temperature and the default setting temperature is
different, specific as follows:
★ Taken the conventional air-cooled hot and cold water machine the highest set temperature
45 ℃, 40 ℃by default.
★ Taken the conventional single maximum set temperature of 55 ℃hot water machine, the
default 55 ℃.
★ Taken the conventional multi-function maximum set temperature of 55 ℃hot water machine,
the default 55 ℃.
★ Taken the regular pool machine set the highest temperature of 40 ℃, the default 27 ℃
★ Taken the part models have special requirements, not here.
Attention
3
：Different number of units, mechanical and electrical flow pressure to protect the
default value is different, specific as follows:
★If a single compressor (normal) model of the horse for 5 P, the current protection value
defaults to 15 A.
★If a single compressor (conventional model) on the number of horse is 8 P, the current
protection value, the default is 25 A.
★If a single compressor (conventional model) on the number of horses to 10 P, the current
protection value defaults to 28 A.
★If a single compressor (normal) model number of the horse is 12 P, the current protection
by default is 30 A.
★Part using a special type of press machine, is not here.
To Next Page
Loading...