To Next PageTo Next Page
Need help?Do you have a question about the Mustee BigTub Utilatub 28F and is the answer not in the manual?
General| Brand | Mustee |
|---|---|
| Model | BigTub Utilatub 28F |
| Category | Plumbing Product |
| Language | English |
Crucial warning to read all installation instructions and inspect for any product damage before commencing.
Lists essential tools like a screwdriver and hammer needed for the installation process.
Steps to prepare before installing the new tub, including turning off water and disconnecting the old unit.
Place the tub upside down, insert legs into corner sockets, and secure them using a hammer and block.
Attach leg levelers to the bottom of the legs and adjust them later for proper leveling.
Drill holes for faucets on the rear ledge while the tub is upside down, using marked drill points.
Position the tub upright and attach the faucet and P-trap assembly as required.
Connect supply lines to shut-offs, turn on water, and check all connections for leaks.
Diagram showing labeled parts of the laundry tub assembly with corresponding part numbers.
A comprehensive list of all components included in the laundry tub package with quantities.
Guidance on cleaning the tub surface using mild soap, recommended cleaners, and rinsing thoroughly.
Advice against using abrasive powders or steel wool pads to prevent scratching the tub surface.
