14
Digital Camera User Guide
How to record burst images?
To record burst images, do the following:
1. Power on the camera.
2. Set the camera to LCD-on mode.
3. Press the Control button to select BURST from
the OSD.
4. Press and hold the Shutter button to record up
to 10 consecutive images. The camera will stop
recording images after 10 images are recorded.
Note: To interrupt the consecutive recording of
images, release the Shutter button at any time.
How to playback images and short
movies?
To playback images, do the following:
1. Power on the camera.
2. Set the camera to Playback mode.
3. Press the / on the Control button to play the
recorded images forward or backward .
* You can choose to review a single image, or up
to 9 images at a time.
To playback short movies, do the following:
On the LCD display
1. Power on the camera.
To Next Page
Loading...
