15Digital Camera User Guide
2. Set the camera to Playback mode.
3. Select an image marked with a icon by
pressing the / and then press the center of
the Control button to play.
On a TV
1. Power on the camera.
2. Set the camera to LCD-on mode.
3. Select the VIDEO OUT NTSC or VIDEO OUT PAL
from the OSD according to the TV output system.
4. Connect one end of the Video cable into the
VIDEO port of your camera and the other end
into the VIDEO IN port of the television.
5. Turn on the TV.
* Select “Video” as the TV input.
6. Set the camera to Playback mode.
7 . Press the / on the Control button to select
the video and then press the center of the
Control button to play.
How to delete images and short mov-
ies on the camera?
Sometimes you may need to delete the captured
images or videos to make room for new recordings.
To delete images or videos, do the following:
1. Power on the camera.
To Next Page
Loading...
