Need help?Do you have a question about the Musway M6 and is the answer not in the manual?
Details voltage, idle current, switched off state, consumption, remote connections, and fuse.
Covers distortion, bandwidth, S/N ratio, damping factor, input sensitivity, impedance, and output power.
Configures crossover type, slope, frequency, phase inversion, and filter characteristics.
Adjusts time delay, distance, and equalization for speaker sound staging.
Covers PC requirements, specs, size/weight, and scope of delivery.
Outlines critical safety measures for device operation, installation, and usage to prevent hazards.
Covers avoiding vehicle component damage, ensuring air circulation, and cable management during installation.
Discusses wiring kit selection, cleaning contacts, and proper connection of power and ground terminals.
Explains the function of the inserted fuse and replacement guidelines.
Connects amplified speaker outputs from head unit; sensitivity is adjustable.
Connects speakers (2-4 Ohms) and details bridging for higher power output.
Describes connection terminals for positive and negative power supply from the vehicle.
Details amplified outputs for subwoofers or speaker pairs, including bridging.
Manages high-level inputs and remote turn-on/out connections for system integration.
Explains methods to turn the amplifier on/off via SPK or REM signals.
Details adjusting input sensitivity and monitoring signal clipping via LED indicator.
Describes AUX inputs for auxiliary sources and Pre-Out for driving other amplifiers.
Covers optical input, Bluetooth connectivity, and digital remote controller input.
Explains connecting to a PC/laptop for DSP software management.
Guides on configuring inputs, outputs, EQ, and time delays based on the intended system setup.
Illustrates a typical wiring setup and shows power output configurations in stereo and bridge modes.
Shows a detailed wiring diagram for connecting a CD player, subwoofer, and speakers.
Details downloading DSP software, installing the amplifier, and connecting to a PC.
Outlines the sequence for turning on the unit and setting up the speaker system and audio.
Covers GUI, languages, signal routing, and the High Level Mix feature.
Details parametric EQ, extensive filter sections, and automatic time alignment adjustments.
Explains individual channel processing, linking, volume, and phase control.
Addresses common issues like no power or no sound on loudspeakers and their remedies.
Helps diagnose problems with specific channels, stereo stage, and audio distortions.
Provides solutions for missing bass or stereo effects, including polarity and cable checks.
Explains causes for the amplifier entering protection mode, like short circuits or overheating.
Offers remedies for unwanted hiss or white noise in the audio output, often related to level settings or cables.
To Next Page
General
