143
XPJ-1462UF
Operation Manual Operations and Maintenance Methods
Before Use
Various
Settings
Setup
Maintenance
Basic
Operations
When problems
occur
Advanced
Operations
Appendix
Printing
Sleep Mode
Stop the printer for
emergency
Printing
Stop the printer for
emergency
Sleep Mode
This product must be powered on all the time. While not in use, make sure to put it into sleep mode.
Failure to do so may result in ink settling, causing print defects or printer failure.
Before putting the printer into sleep mode, follow the instructions on the printer control panel to perform a daily
maintenance.
While in sleep mode, the printer performs following maintenance automatically:
• scheduled automatic head cleaning
• ink circulation
• "Little Charge"
Important
!
If you are going to put the printer in sleep mode for more than 7 days, perform followings once a week:
• Check the ink level in the ink bags. When the message [Ink Low] appears on the control panel, replace with a new
ink bag.
"Checking ink level and replacing ink" P.174
• Agitate the ink in the ink bags.
"Agitating ink" P.171
1
Check that
Important
!
If you are going to leave the printer in
sleep mode for a long period of time,
empty the waste ink tank.
"Empty the waste ink tank" P.182
To Next Page
Loading...
