To Next PageTo Next PageHow to troubleshoot an MVP KOOL-IT KCU-180-AH Ice Maker that does not work?
If your MVP Ice Maker isn't working, start by ensuring it's receiving power. Then, check that the switch is set to "ICE". Finally, verify that the power supply is at 115 V ± 10 % and consider using a dedicated power outlet.
What to do if my MVP KOOL-IT KCU-180-AH Ice Maker makes poor quality ice?
If your MVP Ice Maker is producing poor quality ice cubes, start by checking the water distributor for any clogs and remove any obstructions. Ensure the water supply is adequate by shutting it off and inspecting the filters. Also, clean the air filter thoroughly to ensure proper ventilation. Confirm that there are no nearby heat sources affecting the ice maker's performance. Finally, check the water supply and try power cycling the product.
What to do if water is not supplied to my MVP KOOL-IT KCU-180-AH?
If water is not being supplied to your MVP Ice Maker, first ensure the water valve is open. Next, check that the water inlet hose is properly installed. Then, verify that water is flowing from the source. If these steps don't resolve the issue, inspect the water valve itself; if it's still not working, contact customer service.
Why are the ice cubes from my MVP Ice Maker too cold?
If the ice cubes from your MVP Ice Maker are too cold, ensure the ambient temperature around the ice maker is above 50 ?. Insufficient water supply can also cause this issue, so adjust the water flow accordingly.
General| Ice Type | Cube |
|---|---|
| Production | 180 lbs per day |
| Condenser | Air-cooled |
| Voltage | 115V |
| Type | Undercounter |
| Weight | 150 lbs |
Guidelines and frequency for cleaning and sanitizing the ice machine's interior components.
