EasyManua.ls Logo

Mx Onda MX-LI2100 - Before Connecting the Appliance

Mx Onda MX-LI2100
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
WARNING
This unit operates with a voltage of 230 V, to avoid a possible electrical
shock do not try to open it. This equipment does not have part some that
could be repaired by your, in the event of a wrong operation not manipulate
it, and attend to an Official Technical Service MX ONDA.
Waste electrical products must not be disposed of with household
waste.
This equipment should be taken to your local recycling centre for
safe treatment.
This product complies with European Directives RoHS
(2011/65/UE), on the restriction of use of certain
dangerous substances in electrical and electronic
appliances, transposed to the Spanish legislation by
means of Real Decree 208/2005.
INTRODUCTION
Thank you for purchasing a juicer MX ONDA model: MX-LI2100. It has a
powerful engine that will let you get juices with great ease and comfort. The
selector with two speeds will provide rate adaptation for each type of food to be
prepared. It has It has the following characteristics:
600 W motor power
2 speed selector
Filling mouth 65 mm
Filter centrifuge stainless steel
Moutht for pouring the juice to drip system
Pitcher for juice with 450 ml capacity
Pulp container with 1500 ml capacity
Closing high strength metallic electrical safety lock
slip feet
Stainless steel housing
Fully removable for easy cleaning
BEFORE CONNECTING THE APPLIANCE
Read these instructions and keep them carefully for later use.
Check that the voltage in your outlet is 230 V ~ 50/60 Hz.
Do not use an extension. If you decide under their responsibility to do so,
use only an extension that is in good condition and is suitable for the power
unit.

Related product manuals