mxr Duke of Tone User Manual

CSP039 MXR
Duke of Tone Overdrive
Designed in conjunction with indie pedal builder
Analog Man, the MXR Duke of Tone Overdrive is for
players who want to add a touch of warmth and grit
to their rig while allowing the natural tone and feel of
their high-end gear to shine.
CSP039
jimdunlop.com/csp039
®
™

mxr Duke of Tone Specifications

General

Type	Overdrive
Bypass	True Bypass
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Controls	Volume, Tone, Drive
Power Source	9V DC

Summary

MXR Duke of Tone Overdrive Introduction

External Controls Overview

Footswitch Operation

Toggles the effect on/off, with a white LED indicating when the effect is active.

Clipping Mode Selector

The OD/BOOST/DIST switch determines the pedal's clipping mode for different tonal characteristics.

Volume Control

Adjusts the overall output level of the pedal.

Drive Control

Modifies the intensity or amount of overdrive applied to the signal.

Tone Control

Adjusts the overall equalization (EQ) of the pedal's sound.

Basic Operation and Power

Powering the Pedal

Details power requirements using a 9-volt adapter or power supply; battery operation is not supported.

Getting Started Guide

Step-by-step instructions for connecting the pedal and initial setup, including knob and switch adjustments.

Technical Specifications