mxr Dyna Comp Bass Compressor - External Controls; Output Knob; Clean Knob; Sensitivity Knob

M282 | Dyna Comp
©
Bass Compressor 2
1 OUTPUT knob adjusts volume of compressed signal
2 CLEAN knob adjusts wet/dry signal mix added to the compressor’s output
3 SENSITIVITY knob adjusts sustain time
4 ATTACK switch toggles between slow & fast attack times
5 TONE knob cuts/boosts midrange at 1kHz
6 FOOTSWITCH toggles effect on/bypass (blue LED indicates on)
1
2
5
4
3
6
External Controls