My Fireplace Blower BK3 User Manual

Installation Videos:
MY
FireplaceBlower
MyFireplaceBlower.com:
Installation Instructions:
Installer is responsible to check local codes
and read all instructions prior to installation.
Layout designed in U.S.A. © 2015
My Fireplace Blower
Burlington, Wisconsin
1-800-466-4045
Drywall dust or other fragments may be present in your replace’s vent space, clean this area before you install the
blower kit. Any bearing or motor damage resulting from this condition is not covered by the warranty policy.
Instructions for Design Version - BK3 Fan Kit
This Blower Kit is tested and safe when installed in accordance with these installation instructions. It is your re-
sponsibility to read all instructions and consult the Owner’s Installation Manual for your particular model number
for Supplemental Information before starting installation. Blower operates on 120V/60Hz power.
CLICK
High Quality Aftermarket Fireplace Blowers & Fans
1-800-466-4045
Check the contents of the carton.
Make sure nothing was damaged in shipment.
Do NOT install a damaged blower kit!
Blower Kit Parts
Step 1: Turn Off Fireplace and allow it to cool
down. Disconnect from 120V Power. Shut off
the Gas supply.
Remove Glass Doors. (If applicable: Figure: 1)
Step 2: Remove the front refractory access
panel by lifting up and angling out through the
replace opening. (Figure: 2)
Figure: 1
CLICK
CLICK
NOTE: Diagrams and Illustrations NOT to Scale
Page 1 of 3
WARNING
RISK OF FIRE AND ELECTRICAL SHOCK!
TURN OFF THE GAS AND ELECTRICAL POWER BEFORE INSTALLING BLOWER!
When installed, make sure to contain any excess wire of the cord set;
Preventing it from making contact with moving or hot objects.
Description
Qty.
Fan - 3 Motor System
Power Cord Harness
ON/OFF Rocker Switch
Hardware
Installation Instructions
(Downloadable)
1
1
1
1
1
3-Prong to 2-Prong Adapter
1
GLASS DOOR REMOVAL

My Fireplace Blower BK3 Specifications

General

Brand	My Fireplace Blower
Model	BK3
Category	Fan
Language	English

Summary

MyFireplaceBlower BK3 Fan Kit Installation

Critical Safety Warnings for Installation

Essential safety precautions regarding electrical shock and fire hazards before installing the blower.

Blower Kit Components Checklist

Verifies all parts received are correct and undamaged before installation begins.

Step 1: Power Down and Gas Shutoff

Procedure to safely disconnect electrical power and turn off the gas supply.

Step 2: Accessing the Fireplace Interior

Instructions for removing glass doors and the front refractory panel for access.

Lower Compartment Access and Fan Mounting

Step 3: Remove Control Cover and Louver Panel

Details on removing the control cover and lower louver panel for access.

Step 4: Mount the Fan Assembly

Instructions for positioning and securely fastening the fan assembly within the fireplace.

Electrical Connections and Final Assembly

Step 5: Install Rocker Switch and Connect Power

Guides on installing the rocker switch into the panel and connecting the power plug.

Step 6: Reinstall Panels and Doors

Instructions for reassembling the louver panel, cover, and glass doors.

Wiring Diagram and Operation

Explains the wiring diagram for the fan kit and how to operate the blower.

Installation Compliance and Disclaimers

Notes on conforming to electrical codes and manufacturer disclaimers.