MyBabiie MBBC1 User Manual

MBBC1 My Babiie Closer
Bedside Crib
IMPORTANT! KEEP FOR FUTURE REFERENCE
Suitable for use with beds that have a slatted frame

MyBabiie MBBC1 Specifications

General

Brand	MyBabiie
Model	MBBC1
Category	Baby & Toddler Furniture
Language	English

Summary

Assembly and Use - Initial Steps

Attach side arms into feet

Connect the two side arms into the feet of the crib, ensuring a secure fit.

Join the 2 feet with the base cross bar

Connect the two feet using the base cross bar to form the crib's base structure.

Assembly and Use - Core Steps

Push the crib down onto the 2 side arms

Push the crib body down onto the side arms until it clicks securely into place.

Fasten the velcro fabric covers

Insert the included mattress

Use the wheel locks

Assembly and Use - Height and Panel Adjustment

Adjust the crib height

Adjust the crib inclination

Co-Sleeping Mode Introduction

Co-Sleeping Mode - Fixing to the Bed (Detailed Steps)

Prepare crib for bed attachment

Attach straps to crib

Secure straps to bed frame

Tighten crib to parent's bed

Position metal plate, tighten belts to secure crib firmly to the parent's bed.

Bed Attachment Warnings and Guidelines

Ensure crib is level during attachment

Verify crib is level and flat when attached to the bed to prevent rolling.

Check strap adjusters fit

Confirm strap adjusters are correctly fitted to prevent loosening and gaps.

General Safety & Care Notes

Age and weight restrictions

Usage and part restrictions

Safe use practices

Co-sleeping safety requirements

Fasten belts correctly, ensure no gaps between crib and parent's mattress.

Mattress height requirements

Additional Safety & Care Notes

Mattress and bedding safety

Product placement and hazards

Cot adjustment precautions

Co-Sleeping Mode (Fixing to the Bed)

Co-sleeping pre-requisites

Ensure bed type compliance, crib height alignment, and no interference.

Opening the crib side panel

Securing crib to bed structure

Loop straps around legs, pass around bed structure, fasten clips, and tighten.

Bed type and attachment restrictions

Use with straight-sided beds only; avoid round beds or water beds.

Correct attachment location

Fix crib to the long side of the bed, not the head or bottom.