To Next PageTo Next Page
Need help?Do you have a question about the MYDLINK DCS-930L and is the answer not in the manual?
General| Model | DCS-930L |
|---|---|
| Category | IP Camera |
| Resolution | 640 x 480 |
| Minimum Illumination | 1.0 lux |
| Night Vision | Yes |
| Frame Rate | 30 fps |
| Digital Zoom | 4x |
| Security | WEP, WPA, WPA2 |
| Motion Detection | Yes |
| Power | 5V DC |
| Operating Humidity | 20% to 80% non-condensing |
| Image Sensor | CMOS |
| Connectivity | Wireless |
| Ethernet | 10/100 Mbps |
| Protocols | HTTP, TCP/IP, UDP, SMTP, FTP, DHCP, DNS, DDNS |
| Storage | microSD card slot |
| Operating Temperature | 0°C to 40°C |
Connects the DCS-930L to the network via Ethernet and to a power source.
Creates a password to secure the camera's web configuration interface.
Chooses the specific Wi-Fi network name (SSID) to connect the camera to.
Inputs the password for the selected Wi-Fi network.
Disconnects the Ethernet cable and allows the camera to reboot.
Guides users through creating a mydlink account for remote access.
Instructs to verify the mydlink account via an email confirmation link.
Confirms that the DCS-930L installation process has been successfully completed.
