Need help?Do you have a question about the Myford ML7 and is the answer not in the manual?
General| Swing over bed | 7 inches |
|---|---|
| Spindle bore | 0.75 inches |
| Motor power | 0.5 HP |
| Spindle speeds variation | Step pulley |
| Number of spindle speeds | 6 |
| Distance between centers | 20 in (508 mm) |
Diagram illustrating the overall layout of the ML7 lathe.
Detailed technical specifications and dimensions of the ML7 lathe.
General safety rules for operating the ML7 lathe.
Specific warnings regarding spindle nose and operation.
Essential 'Do's' and 'Don'ts' for safe lathe operation.
Recommendations for placing the lathe on a solid foundation.
Procedures for accurately levelling the lathe for precision work.
List and illustration of supplied parts and dismantled components.
Guidelines for ordering spare parts.
Breakdown of parts for major assemblies like bed, headstock, carriage.
Parts lists for Tri-Leva Speed Selector and Quick Change Gearbox.
Detailed instructions for lubricating the ML7 lathe components.
Identification and function of the lathe's controls and adjustments.
Explanation of headstock drive, speeds, and changing procedure.
Instructions for fitting chucks to the spindle nose.
Practical advice and best practices for lathe operation.
Information on motors and switch wiring for the lathe.
Wiring diagrams for motors with rotary reversing switches.
To Next Page
