Myford ML7 Instructions For Installation And Operation With Pictorial Parts List

Gearboxes supplied for
subsequent fitting only Far M
L7 lathes prior to K125240 and
Super 7 lathes prior to
SK124461 instead of screws
267 (paragraphs 9, 11S and
11M also parts list) use 1/2"
B.S.F. x 3/4". If far your
machine you need the 1/4"
B.S.F. screws, return the metric
screws to us for exchange.
No. 712V
QUICK CHANGE
GEARBOX
Nos
,
1480
(
ML7
)
and 1680
(
ML7-R
)
and Su
p
er 7
)
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
WITH
PICTORIAL PARTS LIST
Myford Ltd, Wilmot Lane, Chilwell Road, Beeston, Nottingham NG9 I
ER Telephone: 01 15 925 4222 • Fax: 01 15 943 1299 email address:
Myford@btinternet.com

Myford ML7 Specifications

General

Swing over bed	7 inches
Spindle bore	0.75 inches
Motor power	0.5 HP
Spindle speeds variation	Step pulley
Number of spindle speeds	6
Distance between centers	20 in (508 mm)