MyKi 4 - User Guide and Safety Information; Choosing the Right SIM Card

User and safety guide
3
USER GUIDE
Contents of the box:
Watch ..............................................................................1
USB charging cable ........................................................1
User and safety guide ....................................................1
Screwdriver .....................................................................1
Screw ..............................................................................2
Tweezers ........................................................................1
Technical specications:
Watch size: 56x41x16.3 mm
Weight: 55 grams
Housing: plastic & silicone
Screen: Capacitive Touch 1.4” LCD 240x240 Pixels
SIM card: Nano SIM
Cellular Services: 4G (CAT4);
3G 3G (DC-HSPA + 4.2 / 2.2 Mbps); 2G (EDGE)
Localization: GPS / Wi-Fi Scanner / LBS / AGPS
USB: Pin to Pin
NFC/Bluetooth: No/Yes
Voice calls/Video calls: Yes/Yes
Water resistance: IP67
Battery: Rechargeable Li-ion battery (800 mAh)
Operating temperature: -20°C to 45°C
Radio frequency: 2412MHz ~ 2472MHz
SAR value when worn on the body: less than 0.882 W/
kg when worn on the arm.
SIM card:
Choosing the right SIM card
MyKi 4 works with 4G (LTE) technology. Make sure the
card is Nano SIM and has active voice and data ser-
vices. If the PIN code of the SIM card is active - it must
be deactivated before inserting it into the Watch. More
information can be found at:
https://mykifamily.com/help-and-support.
Make sure the Watch‘s battery is charged (if not -
charge the device). Unscrew the cap screw (note: with
the screwdriver provided). Carefully open the cover and
insert the Nano SIM card into the slot with the chip
facing up, according to the instructions (note: before
inserting the Nano SIM card, make sure the watch is
switched off). Close the cover and tighten the screw.
After inserting the SIM card, turn on the Watch (by