EasyManua.ls Logo

MYLAN WhisperJECT - Step 9: Confirm Full Dose Received; Confirm Full Dose Delivery; Take Action on Dose Issues; Safety Warning: Needle Exposure

Default Icon
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Step 9 – Confi rm Full Dose Received
10A
10B
Carefully hold and tip the
Syringe Housing to allow the
used 1.0 mL BD
®
, pre- lled,
Glass Syringe to fall into the
Sharps Container.
DO NOT dispose
in regular trash or
a recycling bin.
Check with
your healthcare
provider for the
correct way to
dispose of used
syringes in
your area.
Step 10 – Remove and Dispose of the Used Syringe
When your injection is complete, remove the
Autoinjector straight up from the injection site.
Always con rm that the full dose was
delivered by checking the Viewing Window.
If the full dose was delivered, you will see
a white check mark in a green box inside
the window.
If you believe you did not receive a full dose,
immediately contact your healthcare provider.
WARNING: DO NOT put your  ngers near the needle
end of the Autoinjector. The Needle Depth Adjuster which
covers the needle does not lock. If the Needle Depth
Adjuster is pushed, you may accidentally stick yourself.
Carefully and slowly unscrew the
Syringe Housing from the Handle.
Hold onto the Syringe Housing that
contains the used syringe.
24 25

Related product manuals