MYLAN WhisperJECT - Step 11: Clean the Autoinjector; Clean External Parts; Cleaning Restrictions; Step 12: Store Autoinjector in Protective Case

Step 11 – Clean the Autoinjector
Store the Autoinjector in the Protective
Case as shown until required for
your next dose.
WARNING:
Keep in a clean dry place at room
temperature and out of direct sunlight.
DO NOT store the Autoinjector in
the refrigerator.
DO NOT store 1.0 mL BD
®
, pre- lled,
glass syringe inside the device.
Step 12 – Place the Autoinjector in Protective Case for Storing
Wipe the external parts and the accessible areas of
the Syringe Holder and Handle with a clean, damp
cloth after each use.
IMPORTANT:
DO NOT clean the Autoinjector using any other
methods (e.g., DO NOT immerse in water as this
can damage the Autoinjector).
DO NOT
clean with
detergents,
solvents or
alcohol.
26 27